Skip to main content
Ex_Equipment_BL_UG-Fault & Service Creation _7/12/23-V1
1. Select Equipment Module
2. Select Equipment
3. Select your Equipment
4. Select Raise Fault
5. Select the fault
6. Select the fault
7. Select raise fault
8. Select Sub Fault
9. Select the subfault
10. Add notes
11. Enter in the notes and select the tick
12. Select Add Photo
13. Select how you want to submit the photo
14. Select ok
15. Select the tick icon
16. Select Submit
17. Select the back arrow
18. Select Maintenance
19. Here you can see the created fault
20. Select the back arrow
21. Select Raise Defect
22. Select Defect
23. Select the Defect
24. Select Raise Defect
25. Select the Sub Fault
26. Select the Sub Fault Category
27. Select Notes
28. Complete your notes and select the tick icon to save
29. Select Reference
30. Enter in the reference and click save
31. Select Authortory Body
32. Enter in the Authorising Body and select save
33. Select Time period for rectification
34. Enter in the time period and select save
35. Select the tick icon to save
36. Select the submit icon
37. Select raise service
38. Select Service Type
39. Select the service type
1. Select Equipment Module
2. Select Equipment
3. Select your Equipment
4. Select Raise Fault
5. Select the fault
6. Select the fault
7. Select raise fault
8. Select Sub Fault
9. Select the subfault
10. Add notes
11. Enter in the notes and select the tick
12. Select Add Photo
13. Select how you want to submit the photo
14. Select ok
15. Select the tick icon
16. Select Submit
17. Select the back arrow
18. Select Maintenance
19. Here you can see the created fault
20. Select the back arrow
21. Select Raise Defect
22. Select Defect
23. Select the Defect
24. Select Raise Defect
25. Select the Sub Fault
26. Select the Sub Fault Category
27. Select Notes
28. Complete your notes and select the tick icon to save
29. Select Reference
30. Enter in the reference and click save
31. Select Authortory Body
32. Enter in the Authorising Body and select save
33. Select Time period for rectification
34. Enter in the time period and select save
35. Select the tick icon to save
36. Select the submit icon
37. Select raise service
38. Select Service Type
39. Select the service type